Black
Purple

SHOP THE HOOFQUAD

SERIOUS TOOLS FOR THE WORKING FARRIER
© All Rights Reserved Nu-Vizions 2021

HOOFQUAD PRO

ALUMINUM FINISH

Made with high quality aluminum, square no-roll 14”X14” base, sturdy larger 6”X3”X1” mini anvil, hoof cradle, hoof post, easily removable, larger lynch pin handle for quick direct height adjustments, two rubber coated rasp/tool holders, larger magnetic nail clipping collector. $370.50

THE HOOFQUAD PRO

COLOR (POWDER COATING

FINISH)

Made with high quality aluminum,

square no-roll 14”X14” base, sturdy

larger 6”X3”X1” mini anvil, hoof cradle,

hoof post, easily removable, larger

lynch pin handle for quick direct

height adjustments, two rubber

coated rasp/tool holders, larger

magnetic nail clipping collector.

THE HOOFQUAD-PM ALUMINUM

FINISH

Specially designed for the Racetrack Plater, our new

HoofQuad PM (Platers Mode) is equiped the a large

6”X3”X1” stall jack that boasts a conveniently

drilled hole, perfect for turning heals. as well as

the same turning cams that are included on the

PRO. The PM is equipped with an anti-slide shock

surpressor base mat, to prevent sliding on concrete

floors, while absorbing vibration from impact. The

HoofQuad PM is the perfect tool for race track

platers using lightweight aluminum racing plates.

Comes with a 4” Post and Cradle. Made with high

quality aluminum, square no-roll 14”X14” sturdy

base, easily removable lynch pin for quick height

adjustments, large magnetic nail clipping

collectors.

$370.50

THE HOOFQUAD-PM Race Track Platers

Model COLOR (POWDER COATED FINISH)

Specially designed for the Racetrack Plater, our new

HoofQuad PM (Platers Mode) is equiped the a large

6”X3”X1” stall jack that boasts a conveniently drilled hole,

perfect for turning heals. as well as the same turning

cams that are included on the PRO. The PM is equipped

with an anti-slide shock surpressor base mat, to prevent

sliding on concrete floors, while absorbing vibration from

impact. The HoofQuad PM is the perfect tool for race track

platers using lightweight aluminum racing plates. Comes

with a 4” Post and Cradle. Made with high quality

aluminum, square no-roll 14”X14” sturdy base, easily

removable lynch pin for quick height adjustments, large

magnetic nail clipping collectors.

$398.50
NEW Anti-Side Shock Surpressor Base Mat
$398.50

THE Mule Tough “BAD ASS”

HoofStand (ALUMINUM FINISH)

The Nu-vizions HoofStand Saves Wear & Tear On Your Back

The N-v Hoof Stand is the new standard in long lasting

quality in the farrier industry. The lightweight design has

proven to be the best in the industry and has helped to

reduce back aches and physical wear and tear on farriers,

owners and vets. Horses are much more comfortable and

appreciate the stability that the no-roll square base

provides. Specially designed light weight at 9lbs. Comes

with a 4” Post and Cradle. Made with high quality

aluminum, square no-roll 14”X14” sturdy base, large

magnetic tool holders easily removable lynch pin for quick

height adjustments and magnetic nail clipping collectors.

Limmited Time Special Introductory Offer $265.00

SHOP THE HOOFQUAD

SERIOUS TOOLS FOR THE WORKING FARRIER
© All Rights Reserved Nu-Vizions 2021
MENU

THE HOOFQUAD PRO

ALUMINUM FINISH

Made with high quality aluminum, square no-roll 14”X14” base, sturdy larger 6”X3”X1” mini anvil, hoof cradle, hoof post, easily removable, larger lynch pin handle for quick direct height adjustments, two rubber coated rasp/tool holders, larger magnetic nail clipping collector.

THE HOOFQUAD PRO

COLOR POWDER COATING FINISH

Made with high quality aluminum, square no-roll 14”X14”

base, sturdy larger 6”X3”X1” mini anvil, hoof cradle,

hoof post, easily removable, larger lynch pin handle for

quick direct height adjustments, two rubber coated

rasp/tool holders, larger magnetic nail clipping

collector.

$398.50
$370.50
$370.50

HOOFQUAD PM Platers Model ALUMINUM

FINISH

Specially designed for the Racetrack Plater, our new

HoofQuad PM (Platers Mode) is equiped the a large

6”X3”X1” stall jack that boasts a conveniently drilled

hole, perfect for turning heals. as well as the same

turning cams that are included on the PRO. The PM is

equipped with an anti-slide shock surpressor base

mat, to prevent sliding on concrete floors, while

absorbing vibration from impact. The HoofQuad PM is

the perfect tool for race track platers using lightweight

aluminum racing plates. Comes with a 4” Post and

Cradle. Made with high quality aluminum, square no-

roll 14”X14” sturdy base, easily removable lynch pin for

quick height adjustments, large magnetic nail

clipping collectors.

Black

Purple

THE HOOFQUAD PM Racetrack Platers Model

COLOR POWDER COATING FINISH

Specially designed for the Racetrack Plater, our new

HoofQuad PM (Platers Mode) is equiped the a large

6”X3”X1” stall jack that boasts a conveniently drilled hole,

perfect for turning heals. as well as the same turning

cams that are included on the PRO. The PM is equipped

with an anti-slide shock surpressor base mat, to prevent

sliding on concrete floors, while absorbing vibration from

impact. The HoofQuad PM is the perfect tool for race track

platers using lightweight aluminum racing plates. Comes

with a 4” Post and Cradle. Made with high quality

aluminum, square no-roll 14”X14” sturdy base, easily

removable lynch pin for quick height adjustments, large

magnetic nail clipping collectors.

$398.50
Anti-Side Shock Surpressor Base Mat

THE Mule Tough “BAD ASS”

HoofStand (ALUMINUM FINISH)

The Nu-vizions Hoof Stand saves wear & tear on your back! The

Badd Ass Hoof Stand is the new standard in long lasting quality

in the farrier industry. The lightweight design has proven to be

the best in the industry and has helped to reduce the back

aches and physical wear and tear on farriers, owners and vets.

Horses are much more comfortable and appreciate the stability

that the no-roll square base provides. Specially designed light

weight at 9lbs. Comes with a 4” Post and Cradle. Made with

high quality aluminum, square no-roll 14”X14” sturdy base, large

magnetic tool holders easily removable lynch pin for quick

height adjustments and magnetic nail clipping collectors.

Limmited Time

Special Introductory Offer

$265.00